Ask An Expert In Singapore
Get free help from our community of Contractors
Previously Asked Questions
47 Questions
401 Views
2 Answers
Monthly grass cutting service
I would like to find out what is the cost of monthly grass cutting? Semi-detached house.
Repair and renew
I found water dripping in my kitchen, suspect to be due to leaking pipe concealed in a cornice. There is a seepage in one toilet due to faulty pipe joints. In another toilet, the false ceiling is damp and damaged due to leakages, not sure if it's from pipes or drainage or upper floor problems. I also need to replace my kitchen sink and tap, as well as the counter top. A toilet bowl/cistern also need to be replaced. Should I be looking for a plumber or a general contractor ?
Hacking and tiling
May i know how much is it to hack and tile 2 bedrooms and 1 living room of a 3 room resale flat?
repositioning WC
Hi, I am staying in a BTO flat that was completed 7yrs ago. Can I reposition the WC when I hack and redo the entire toilets
Laying Laminate Flooring.
I'm about to lay laminate flooring through my home. Going from the entrance hall through the living room and into the back hall. But the entrance hall floor is concrete which is roughly 10mm higher than the rest of the rooms. The entrance is roughly 1.5m by 1m. What is the best way to level this?
how to select a qualified contractor
I am from a SME in Tuas area, Singapore. The plant buildings have several set of shutter windows of about 1.0 x 40 meters installed about 20 years ago. I want to install a s/s wire net outside of the windows to protect glass plate from fall down. In addition, the ceiling board outside of the wall (about 0.8 x 40 meters @ 40 meters height) need to be replaced with s/s wire net as well. Because of the space limitations (many service pipes) in the area, scaffolding is required. Are you able to recommend qualified contractors to discuss the project.
Lacquer bedroom veneer doors
Hi, would like to know is lacquer the only way to restore and make the hdb bedroom veneer doors look better? Any other ways? What’s are the costs